如何使用MTV的遙控學習功能

There are 4 buttons you can config : the 2 TV buttons and VOL +/-

See MTV5000 manual page 14-15

Alternatively, if you have a Samsung, Sharp or Sony TV, you can use this simple step.

作者：PeterLie (221.xxx.xxx.213) 發表主題：0 回應文章：120 日期：2008-08-13 01:01

The recent batches of Magic TV remote allows pre-set codes as follows:

1. From Magic TV remote, hold both Power On button and Magic TV Menu button until the red LED flashes.
2. From Magic TV remote, press 1 for Samsung, or press 2 for Sharp, or press 3 for Sony. This would set the pre-programmed codes for these brands (arranged in alphabetical order). The red LED should now be off.
3. Press the Magic TV Menu button to exit learning mode.
4. See if the four learnable buttons on Magic TV can now control your Samsung/Sharp/Sony TV without regular learning.

Note: if it fails, please try to clear the learned codes as per Magic TV manual, then try again. If it does not work for you, your remote may not support this function, please perform the regular learning steps as per manual.

If it fails, see the following tips.

作者：PeterLie (221.xxx.xxx.245) 發表主題：0 回應文章：120 日期：2008-07-19 23:30

Some tips:

- Remove any transparent bag or cover from the remotes
- The two remotes need to be placed really really close
- Perform the learning at a place far away from any light sources

來源:
》avbuzz主題：Magic TV 3000 Remote Control Learning Function